Fill It, Light It, Get In.
There is no pump, no heating element and no power lead. The stove stands beside the tub, you light a fire in it, and the water circulates through it on its own as it warms.
Cedar staves, stainless steel straps, an insulated cover and a set of steps arrive as a kit. The floor, the benchtops and the stairs come already made up, so most of the work is standing the staves and pulling the straps tight.


Key Features
The Fire Does the Circulating
The stove works on the thermosiphon principle. Water heated inside the firebox rises and leaves through the top hose, which drops the pressure behind it and draws cool water out of the bottom of the tub. That loop runs for as long as the fire is lit.
Because nothing has to be pumped, there is no motor to fail and nothing to plug in. The firebox is wrapped in a double wall water jacket, so the whole of it transfers heat rather than just the top.

Western Red Cedar, or Thermowood
Cedar is the standard. The staves are around 38 mm thick, and the grain swells evenly once wet, which is what pulls a barrel tub water tight without sealant. It also carries its own scent and resists rot and insects on its own.
Thermowood is the alternative, hemlock baked at 180 to 230 degrees for up to 96 hours. The heat drives out what fungi feed on, so it holds its shape, insulates a little better and lasts longer outdoors.

The Heater Sits Outside the Tub
An internal stove eats the seat it stands on and puts hot metal in the water with you. This one stands clear of the shell and connects with two hoses, which leaves the whole bench ring free.
It is easier to live with too. You load wood, rake ash and clean the firebox from outside, without leaning over the water.

Covered Between Soaks
The cover is a high density polystyrene foam core in UV resistant marine grade vinyl, with chlorine resistant fittings and lockable safety clips.
Left on, it holds the heat in after the fire dies down and keeps leaves, rain and anything else out of the water.

At a Glance
- Capacity: 4 to 10 people depending on size
- Diameters: 1500 mm, 1800 mm and 2100 mm
- Depths: 900 mm or 1200 mm
- Timber: Western Red Cedar, or thermo treated hemlock
- Heater: 16 kW external wood fired, 304 stainless steel
- Power needed: None
- Assembled weight: 300 to 400 kg
- Delivery: Pick up, Tasmania, or interstate freight

Why a Wood Fired Tub
A wood fired tub goes where the power does not. No circuit, no electrician and no meter ticking over while it heats, which makes it as workable at a shack or a block with no mains as it is on a back deck in town.
It also asks very little of you once it is in. There is no pump to service and no filtration to run. You keep the water clean, keep the cover on, and light a fire when you want to use it.

NO RUNNING COSTS
Firewood heats it. Nothing is drawing power between soaks.
PUT IT ANYWHERE
No power connection to plan around, so siting is up to you and the ground under it.
VERY LITTLE TO GO WRONG
No pump, no element, no control board. Timber, stainless steel and a fire.
IT AGES WELL
Cedar and 304 stainless are both meant to sit outside. The tub weathers rather than degrades.
Specifications
| Diameters | 1500 mm, 1800 mm, 2100 mm |
| Depths | 900 mm or 1200 mm |
| Capacity | 1500 mm seats 4 to 5, 1800 mm seats 6 to 7, 2100 mm seats 8 to 10 |
| Timber | Canadian Western Red Cedar, or thermo treated hemlock |
| Stave thickness | Approximately 38 mm |
| Straps and fittings | 304 stainless steel |
| Assembled weight | 300 to 400 kg |
| Heater | External wood fired, thermosiphon circulation |
| Output | 16 kW |
| Heater body | 580 x 360 x 540 mm, length x width x height |
| Heater material | 304 stainless steel, body and flue |
| Chimney | 2 m |
| Electricity | Not required |
| Cover | High density foam core, marine grade vinyl, lockable clips |
Included and Delivery
What’s Included
- External wood fired stainless steel heater and chimney
- Stainless steel tightening straps
- Wooden benches
- Wooden steps
- Plumbing accessories including inlet and outlet pipes, valves and connections
- High density polystyrene foam thermal cover
- Assembly manual, instructions and installation video
- Hot tub liner
Includes a hot tub liner. Timber tubs depend on a precise fit between the staves to stay watertight, and once assembled and sealed correctly, yours will hold water on its own. The liner is included so you always have a simple way to guarantee a flawless seal. Fit it at any time, with no additional sealing or maintenance required.
Delivery and Installation
- Pick up from the warehouse at no additional cost
- Delivery within Tasmania for an additional $300 to $500
- Interstate freight from $500 to $1000
Freight varies with size and destination. Contact us for a figure on your address before you order.
Once It Is Full, All It Needs Is a Match
Fill it, stack the firebox, and let it come up to heat while the afternoon goes. What you get at the end of it is hot water outdoors, the smell of cedar and woodsmoke, and no reason to be anywhere else for the next hour.














Fiona –
Our hot tub was exactly what we hoped it would be. Looks fantastic, easy to heat with the firebox. Hubby most impressed with comprehensive installation instructions both written and video. Highly recommend these guys.
Ned Toombs –
I would HIGHLY RECOMMEND Shym Sauna’s and Spa’s to everyone. We had exceptional communication with Artem throughout the whole process of inquiring, purchasing and then assembling the hot tub. We purchased the larger 1800×1200 tub and it heated within just a few hours (autumn Tassie weather temperatures) to a temperature where we were able to get in and float around comfortably. We would highly recommend this size. We can’t believe how well it holds its warmth during the nights and day time with only just a small/short fire each evening. The hot tub was quick and easy to assemble with the help of the online video and manual. We couldn’t talk more highly of this product. Do yourself a favour and purchase one today!!! LIFE CHANGING!
Paul Galea –
Our hot tub is proving to be a great success and our guests absolutely love it and spending time in it under the Milky Way. Artem’s installation video was invaluable and interestingly we have not had anywhere the amount of leaking suggested in the manual notes. I’d happily recommend to anyone wanting to purchase one.