$650.00
5.0
5.0
Upgrade your Harvia Xenio sauna with the Fenix FX001XW WiFi touchscreen control panel.
The 4.3 inch glass touchscreen replaces your existing Xenio panel and connects to the MyHarvia mobile app, so you can warm the sauna, change settings and check on it from your phone. Save up to three of your own presets, and let the panel adapt to how your heater performs over time.
This is an upgrade panel rather than a complete control system, so it needs to connect to a compatible Harvia Xenio control unit. A door sensor is not included and is required for remote starting.
Key Specifications
4 in stock
Any questions? We’re here to help. Send us a message or chat with one of our sauna specialists.
Did you know? We offer one of Australia’s largest ranges of premium sauna products & materials — heaters, hot tubs, accessories, and more
The Harvia Fenix FX001XW puts a 4.3 inch glass touchscreen where your old Xenio panel used to be. Temperature, heating time, lighting and ventilation all sit behind one clean display, and once the panel is on your wireless network the same controls follow you onto your phone through the MyHarvia app.
It is an upgrade panel rather than a whole new control system. The Xenio control unit you already have stays exactly where it is.
The row of fixed buttons gives way to a 4.3 inch glass touchscreen that shows the temperature, the heating time and how far along the session is, all at a glance. Lighting and ventilation are a tap away rather than a key combination to remember.
Put the panel on your wireless network and the MyHarvia app gives you the same controls from your phone. Start warming the sauna before you go downstairs, nudge the temperature without getting up, or check from the office whether you left it running.
The MyHarvia subscription is included for life, along with the panel’s AI features. There is no monthly fee and nothing to renew.
Save up to three of your own settings, so a quiet weekday session and a hot Sunday one are each a single tap away.
The panel also learns how your particular heater behaves over time and adapts to it, which holds your chosen temperature more steadily the longer you use it.
The FX001XW is not a standalone controller and will not run a sauna on its own. It replaces the panel on a compatible Harvia Xenio control unit, and that unit stays in place.
A door sensor is not included. Remote starting from the app needs one. If your sauna does not already have a door sensor or safety device fitted, ask us about the FX002XW package, which is the same panel supplied together with a sensor.
Compatibility varies between Xenio models, and the Xenio CX110 in particular does not support the Fenix remote control functions. Check your control unit model with us before ordering and we will confirm the right package for your sauna.
More than anything else, it is the panel on the wall that dates a sauna. The FX001XW is the least disruptive way to bring an older Xenio system up to date: the control unit, the wiring and the heater all stay where they are, and the 5 m cable in the box connects the new panel in place of the old one.
The supplied 5 m cable connects the panel to the control unit you already own, so the unit itself does not need rewiring.
Rated IPX4 against splashing water, so it copes with the humidity and the occasional ladle that goes wide.
The panel adapts to how your heater performs over time, giving steadier temperature control the longer it is in use.
MyHarvia handles this panel alongside other Harvia equipment, so everything sits under a single login.
| Model | FX001XW |
|---|---|
| Type Code | FX001 |
| Product Type | WiFi touchscreen control panel (upgrade) |
| Control Type | Fenix 4.3” glass touchscreen |
| Remote Control | MyHarvia mobile app |
| Subscription | Lifetime MyHarvia app and AI features, included |
| Presets | Up to 3 customisable modes |
| Temperature Adjustment Range | 30°C to 110°C |
| IP Rating | IPX4 |
| Electrical Frequency | 50/60 Hz |
| Installation Location | Wall |
| Colour | Black |
| Main Material | Plastic |
|---|---|
| Certifications | CE, ETL, EAC |
| Item Number Harvia | FX001XW |
| Electrical Number (STK) | 8264766 |
| Control Panel Width | 93 mm |
| Control Panel Depth | 20 mm |
| Control Panel Height | 131 mm |
| EAN | 6417659044004 |
| Package Size | 250 x 175 x 55 mm |
| Net Weight | 0.52 kg |
| Gross Weight | 0.66 kg |
| Door Sensor | Not included. Required for remote starting |
Not included: a door sensor. One is required for remote starting.
The panel takes the place of an existing Harvia Xenio control panel and connects with the cable supplied, so swapping it over does not call for an electrician.
If a door sensor is added for remote use, wiring it to the heater’s circuit board must be carried out by a licensed electrician in line with local regulations.
Harvia covers control units for 2 years under family use, and 2 years under non-consumer or commercial use. Both are subject to Harvia’s warranty terms and conditions.
Everything that makes the sauna work is already installed. The Fenix simply gives it a better face: a screen worth looking at, presets that remember how you like it, and the option of starting the whole thing from your phone.
Subscribe to our newsletter and get the latest designs, pricing and updates about wooden saunas & hot tubs.
| Weight | 0.66 kg |
|---|---|
| Dimensions | 25 × 17.5 × 5.5 cm |
Product Price:
$650.00
4 in stock
