OVERVIEW

This stainless steel flue kit is a complete chimney package for a wood burning sauna heater. It carries the flue from the heater outlet, through the roof, and safely above the sauna.

It is the same kit as our black Cozy chimney set, supplied in a natural stainless steel finish. The black set is the premium finish made for Cozy heaters, while this one is our standard kit and suits any wood burning sauna heater with a matching flue outlet, including the Harvia range.

Insulated twin wall sections keep the outer surface cooler than a single skin pipe. As a result, the flue can pass through the roof with the supplied flashing and trim.

Stainless Steel Flue Kit for Wood Burning Sauna Heaters
Finish	Natural stainless steel
Construction	Insulated twin wall flue sections
Suits	Wood burning sauna heaters with a matching flue outlet
Sold As	Complete flue kit, purchased separately from the heater

WHAT IS INCLUDED

The kit is supplied as a full chimney run rather than loose parts, so the pieces fit together without sourcing adaptors separately.

Insulated twin wall flue sections
Starter adaptor from the heater outlet to the insulated flue
Rain cap
Roof flashing with a flexible weather seal
Ceiling trim plate
Locking clamps

KEY FEATURES

Not tied to one heater range:
The stainless kit is our standard flue kit. Therefore it suits any wood burning sauna heater with a matching flue outlet, including Harvia, not only one brand.

Insulated twin wall sections:
The insulated build keeps the outer skin cooler than a single wall pipe. As a result, it is better suited to passing through a roof.

Complete roof penetration kit:
Flashing, ceiling trim and clamps are included. Because of this, the flue can be finished neatly inside and weathered outside.

BEFORE YOU ORDER

Check the flue outlet diameter on your heater before ordering, so the starter adaptor matches. If your heater is a Cozy model, order the black Cozy chimney set instead, which is the premium finish made for that range.

A wood burning sauna heater and its chimney should be installed to the heater manufacturer’s instructions and to local building requirements. If you are unsure, use a qualified installer.