Start your sauna from your phone

The Harvia SAB00103 door switch sensor lets a Harvia control unit start the heater remotely through the MyHarvia app. It checks that the sauna door is closed before the heater can start, which is the safety step Harvia requires for remote starting.

Small black sensor that sits neatly on the door frame
Works with a magnet fitted to the door
Rated IP65 for use inside the sauna room

Works with

Harvia Xenio CX1704XW WiFi control unit
Harvia Fenix FX001XW WiFi control panel, fitted to a Harvia Xenio control unit

The Harvia Fenix FX170 control unit already comes with a door sensor in the box.

Installation

The sensor must be connected by a licensed electrician. It is wired to the safety terminals of the heater control unit, and remote start is then switched on in the control panel settings.

This door sensor is made for home saunas. A commercial or public sauna needs the Harvia SFE safety device instead.

Specifications

Model	SAB00103
Use	Home saunas
Colour	Black
Sensor size	36 x 29 x 10 mm
Cable	5 m, 2 x 0.22 mm²
IP rating	IP65
Where it goes	Inside the sauna room
EAN	6417659027717

In the box

Door sensor with 5 m cable
Magnet
Mounting hardware

Weight	1.5 kg
Dimensions	27 × 15.5 × 6 cm

Warranty

This product is covered by the Australian Consumer Law, together with any manufacturer warranty that applies to it.

Warranty periods vary from product to product. The terms that apply to this one are set out in the manual supplied with your order.

For how to make a claim, and what a warranty does not cover, see our Terms and Conditions and our Returns and Refunds page.

Reviews

There are no reviews yet.

Be the first to review “Harvia Sauna Door Switch Sensor (SAB00103)”