Original price was: $3,500.00.$3,000.00Current price is: $3,000.00.
5.0
5.0
An oval cold plunge tub with a seamless 304 stainless steel bowl, insulated composite cladding and two stainless tension bands. Supplied with a fitted cover.
1350 by 685 mm on the ground and 717 mm tall, so it sits on a balcony, a deck or a garage floor. Fill it and use it as it is, or run it with a chiller to hold a set temperature.
Any questions? We’re here to help. Send us a message or chat with one of our sauna specialists.
Did you know? We offer one of Australia’s largest ranges of premium sauna products & materials — heaters, hot tubs, accessories, and more
The bowl is one piece of 304 stainless steel. Nothing is glued in, there is no liner to split and no timber holding the water, so what you clean is a smooth metal surface and what the water touches never changes.
Around it sits insulated PVC cladding, pulled tight by two stainless bands. The cladding keeps the cold in and takes the weather; the steel does the work.
The bowl is pressed and welded as a single vessel in 304 stainless steel, the same grade used for the tanks and benches in a commercial kitchen. It does not stain from chlorine or hydrogen peroxide, it does not hold odour, and it wipes down in a minute.
There is no separate liner. That matters over time, because a liner is the part that creases, discolours and eventually leaks on a tub that gets used every day.
The outside is 18 mm PVC board over 20 mm of nitrile rubber insulation. The insulation is the point: cold water in an uninsulated tub warms up from the outside all day, and a chiller then runs harder to hold it down.
The board itself is made to sit outdoors. It does not need oiling, it will not split or grey off the way sawn timber does, and it holds its colour.
Two stainless bands run around the tub and tension with turnbuckles, the same way a barrel is hooped. Nothing is fixed through the cladding, so there are no fastenings sitting in the weather and nothing to seize.
If a board ever has to come off, the bands slacken and it lifts out. A drain valve sits low on the same end.
The fitted cover sits down over the rim in two halves, so you fold one back rather than lifting the whole thing off.
Left on, it keeps leaves, rain and light out of the water, and keeps the cold in. Anything that stops the water warming up between plunges is work the chiller does not have to do.
Most tubs at this size are a plastic shell in a timber surround. This is the other way round: the vessel is steel and the timber look is cladding over insulation, which is the arrangement that lasts and the one that holds temperature.
It is also a sensible footprint. At 1350 by 685 mm it goes through a standard doorway, sits on a balcony or in a garage, and does not need a slab poured for it.
One welded stainless bowl. No liner to crease, discolour or leak.
20 mm of nitrile rubber insulation under the cladding, so a chiller works less to keep it down.
PVC board and stainless bands. Nothing to oil and nothing to rust.
1350 by 685 mm and 717 mm tall. Balcony, deck, garage or bathroom.
| Bowl material | 304 stainless steel, seamless |
| Steel thickness | 1.5 mm |
| Cladding | PVC board, 18 mm |
| Insulation | 20 mm nitrile rubber, between bowl and cladding |
| Bands | Two, stainless steel, turnbuckle tensioned |
| Fittings | Drain valve on the end panel |
| Cover | Fitted two piece cover, included |
| Warranty | 1 year |
| Outside length | 1350 mm |
| Outside width | 685 mm |
| Outside height | 717 mm |
| Inside depth | 599 mm |
| Shipping crate | 1420 x 830 x 960 mm |
| Shipping weight | 100 kg |
Freight is quoted on your address at checkout. Contact us if you want a figure before you order, or if the tub has to be carried upstairs.
Filled, covered and run with a chiller, it holds the temperature you set and is ready whenever you are. No bags of ice, no waiting for it to come down, and nothing to do afterwards but put the cover back on.
| Weight | 100 kg |
|---|---|
| Dimensions | 142 × 83 × 96 cm |
Product Price:
Original price was: $3,500.00.$3,000.00Current price is: $3,000.00.
